Guides

The Mohs hardness scale: test any rock with a fingernail, a coin and a knife

In 1812 a German mineralogist ranked ten minerals by which one scratches which. Two centuries later, it's still the fastest identification test there is.

2 minute read. November 16, 2026

A deep blue star sapphire with a six-rayed star of light
The Star of Bombay, a 182-carat star sapphire. Sapphire is corundum, 9 on the Mohs scale. Photo: James St. John, public domain.

Want to know what your rock is? Try to scratch it. That's the whole idea behind the Mohs hardness scale, invented in 1812 by German mineralogist Friedrich Mohs. He lined up ten minerals so that each one scratches everything below it. No machines, no chemicals, just "who scratches whom."

Two hundred years later, geologists still carry a pocketknife and a scrap of glass for exactly this reason.

The 10 minerals of the Mohs scale

HardnessMineralEveryday comparison
1TalcCrumbles under a fingernail; baby powder
2GypsumFingernail scratches it
3CalciteCopper coin scratches it
4FluoriteKnife scratches it easily
5ApatiteKnife scratches it with effort; tooth enamel
6Orthoclase feldsparScratches glass
7QuartzScratches glass and steel easily
8TopazScratches quartz
9Corundum (ruby, sapphire)Scratches topaz
10DiamondScratches everything

Your free hardness kit

You already own the tools:

A red ruby crystal sitting in white calcite rock
Ruby (hardness 9) in calcite (hardness 3): one of the hardest minerals next to one of the softest. Photo: James St. John, public domain.

How to do the test

  1. Find a clean, fresh, flat spot on the rock. Weathered crust is softer than the inside.
  2. Press the tool firmly and drag it about a centimeter.
  3. Wipe it with your thumb. A real scratch is a groove you can feel. A soft tool often leaves a line of its own powder that wipes away, which fools beginners all the time.
  4. Work up the scale: fingernail, coin, knife, glass. Stop at the first tool that leaves a scratch.

Example: a clear crystal that the knife can't scratch, and that scratches glass easily, is likely quartz. A similar-looking crystal that a coin scratches is probably calcite.

Surprising Mohs facts

How hardness affects value

HardnessWhat it means for value
Under 5Scratches easily. Mostly collector specimens and carvings; rarely in rings
5 to 6.5OK for pendants and earrings, wears in rings over time
7 and upDurable gemstones. Fine sapphire, ruby and diamond sell for hundreds to thousands per carat

Hardness also exposes fakes. Glass "gems" are about 5.5, so a "sapphire" that a steel file scratches isn't a sapphire. See our gemstone identification guide for more tests.

Prices are rough guides. Never scratch-test a stone you plan to sell on a visible face; use the back or an edge.

Skip the scratching

Snap a photo with RockFinder to identify your rock first, then use a scratch test to confirm it.

Questions people ask

What is the Mohs hardness scale?

It's a ranking of mineral hardness from 1 to 10 based on scratching: a harder mineral scratches a softer one. Talc is 1 and diamond is 10. It was created by Friedrich Mohs in 1812.

How do I test hardness at home?

Try to scratch the rock with a fingernail (about 2.5), a copper coin (about 3.5), a steel knife or nail (about 5.5) and a piece of glass (about 5.5). Then try to scratch glass with the rock. Wipe the mark to make sure it's a real scratch, not a streak of powder.

Is the Mohs scale linear?

No. The steps are uneven. Diamond (10) is several times harder than corundum (9), while the gap between 1 and 2 is tiny. It shows order, not exact strength.

Does hardness make a gemstone more valuable?

Often, yes. Stones of 7 or more resist everyday scratches, so they work in rings and sell for more. Soft stones like fluorite (4) are popular with collectors but rarely used in jewelry.

Keep reading